-$7.36

[Limited] USB 3.0 PCI-E 1X to 16X Riser Card Extension Cable + USB 3.0 Cable

$16.95 $9.59

12 disponibles

Compare

Descripción

The newest and top of the line solution for setting up Ethereum mining rigs (or any other GPU-mined altcoin), whether small open air rigs or large lack based miners. 60cm USB 3.0 extender cable enabling flexibility in the placement of your PCI-E devices. Also, it is Plug and play, no driver needed to install. PCI-E card can be inserted in any PCI-E slot: 1x, 4x, 8x, or 16x!

1. This extension is applicable to the mainboard PCI – E slot (1 x , 4 x ,8 x, 16 x). Please plug in the power cord for the floppy. When plug PCI – E extension must be computer broken wires plug again.
2. The form a complete set of wire rod is customized, never grab line to plug in. Remember that!
3. When plug wire must identify the direction, not to counter or offset, prevent burning equipment, plug wire when the socket of equipment first, then plug wire, avoid too hard plug socket pin is broken.
4. Big 6 pin for power supply standard parts, please check put in place, when inserted into the power supply plug line must be careful.
5. Dual-core graphics Suggestions with the old line, the mainboard is 16 x also recommends using the old row line!

Specification:
· Compatible with 1x, 2x, 4x, 8x, 16x PCI-E slot of the motherboard
· USB length: 60cm
· Board Size:127mm x 42mm x 12mm(Approx.)

Package List:
1x PCI-E 16X Adapter
1x PCI-E 1X Riser Board
1x USB 3.0 Cable

Note:

Power plug (SATA) and plastic cord are not included.
Available until sell all this product.